Skip to content

Best Sublimation Printer for Beginners, With Real Setup Costs

Posted on November 20, 2026

The best sublimation printer for most beginners is the Epson SureColor F170, a $399 printer made only for sublimation that refills from $24.95 ink bottles. I’d budget about $515 for a full mug setup built around it. The cheapest way in is a new Epson EcoTank ET-2803 ($239.99) filled with sublimation ink from $23.73, which brings a mug setup down to about $380, but Epson’s warranty may not cover damage caused by ink it didn’t make.

I haven’t owned or tested any of these printers. The picks come from the makers’ own pages, Amazon and maker-site prices I checked on November 20, 2026, and Etsy listings I read the same day to see what finished mugs and tumblers sell for. Prices change often, so check the current price before you buy.

Quick picks

  • Best for most beginners: Epson SureColor F170, $399, prints up to 8.5 inches wide, cheapest genuine ink of the dedicated printers here
  • Lowest cost to start: a new Epson EcoTank ET-2803 ($239.99) filled with Hiipoo sublimation ink (from $23.73), with the warranty risk that comes with it
  • Cartridges instead of tanks: Brother SP-1, $379.99, prints up to 8.5 by 14 inches (per Brother) and has a 2-year warranty, but its ink costs about five times as much per milliliter as Epson’s
  • Longest warranty I found: Sawgrass Virtuoso SG500 bundle, $599.95 with starter ink and paper, and Sawgrass gives 3 years of warranty on printers bought since October 1, 2025
  • Bigger prints later: the Sawgrass SG1000 ($1,699.95, up to 13 by 19 inches) or a converted Epson EcoTank ET-15000 ($449.99, also 13 by 19)

As an Amazon Associate I earn from qualifying purchases. The Amazon links here pay me a small commission at no extra cost to you.

What sublimation works on

Sublimation printing puts special ink on transfer paper, and a heat press then moves that ink into the item. Sawgrass, one of the printer makers, explains on its blog about coated and uncoated products that “Sublimation dye needs something to bond with,” which means polyester fabric or a hard item with a polymer coating made for sublimation. Plain cotton, natural fabrics and uncoated wood need a different transfer paper.

That rule decides what you can sell, because mugs and tumblers have to be sublimation blanks with the coating already on them, and shirts have to be polyester or mostly polyester. The A-SUB paper listing says fabric should have no more than 30% cotton, and Brother’s Australian site says to use “white or light coloured items that are 100% polyester” for the best results, so a dark cotton tee is out.

The printers, one by one

1. Epson SureColor F170 ($399)

The F170 is Epson’s desktop printer built for sublimation, so it comes ready for sublimation ink and there’s nothing to convert. Epson’s F170 product page lists it at $399 with a standard 1-year unit exchange warranty, and it prints on sheets up to 8.5 inches wide. Ink comes in 140 mL bottles that pour into tanks, and Epson sells each color for $24.95, so a full set of four is $99.80.

Epson’s page says the printer is designed for Epson ink bottles only, and on November 20, 2026 epson.com showed it out of stock while Amazon had it at $399. Sheets can be up to 47.2 inches long, but the 8.5 inch width rules out wide prints, so a 20 oz tumbler wrap (about 9.3 by 8.2 inches on maker templates) has to go in with the 8.2 inch side across.

2. A converted Epson EcoTank ET-2803 (about $264 with ink)

A cheaper route is to fill a brand-new Epson EcoTank with sublimation ink instead of the ink that came in the box. The ET-2803 was $239.99 on Amazon, and the Hiipoo ink set that lists it as compatible started at $23.73 (the lowest listed option) for 127 mL of black and 70 mL each of the three colors. That’s the cheapest ink here by far, at about 7 cents a milliliter.

The catch is the warranty, because Epson’s ink page says “Non-genuine ink could cause damage not covered by the printer’s limited warranty.” The Hiipoo listing shows no warranty of its own, so if the converted printer breaks, the repair is likely on you. I’d only go this way to test whether you like sublimation before spending $400 or more.

3. Brother SP-1 ($379.99)

Brother’s SP-1 is the other dedicated printer under $400 ($379.99 on Brother’s US site, down from a $429.99 list price), and Brother’s Australian site says it prints up to 215 by 355 mm, about 8.5 by 14 inches, and Brother’s US site lists a 2-year limited warranty. It uses four 47 mL cartridges instead of tanks, and Staples listed a set of four at $169.99. That works out to about 90 cents a milliliter, against about 18 cents for Epson’s bottles, so the SP-1 is cheaper to buy but more expensive to keep printing.

4. Sawgrass Virtuoso SG500 ($599.95 bundle)

The SG500 is a common beginner pick, including on Neil and David’s list and in Color Me Crafty’s comparison. The Amazon bundle at $599.95 includes the printer, starter 31 mL inks and paper, and it prints up to 8.5 by 14 inches. Sawgrass’s printer page says printers bought on or after October 1, 2025 are covered for 3 years or 100,000 prints, though the Amazon listing still says 2 years, so check which one your seller honors. Its ink is also the most expensive here: a 4-pack of 31 mL cartridges was $288.96 on Amazon, about $2.33 a milliliter.

If you read an older review that talks about Sawgrass Creative Studio, that software is gone. Sawgrass’s notice says Creative Studio and Print Manager were discontinued on February 1, 2025, and replaced by the MySawgrass Design Tool and Sawgrass Print Utility.

5. For bigger prints: SG1000 or ET-15000

For full-front shirt prints you need a wider printer. The Sawgrass SG1000 was $1,699.95 on Amazon and prints 11 by 17 inches as standard, or 13 by 19 through its bypass tray. The cheaper route is the Epson EcoTank ET-15000 at $449.99, which also takes 13 by 19 sheets and may be convertible like the ET-2803, though I didn’t confirm which sublimation inks fit it, and the same warranty risk applies. Epson’s 24 inch SureColor F570 lists at $2,495, which is more of a second-printer purchase once a shop is busy.

What the ink costs to refill

Ink is where these printers differ the most once you own one, so I compared the price of a full set of four colors at the prices I found on November 20. A milliliter doesn’t print the same amount on every printer, so treat this as a rough comparison and not a cost per print.

PrinterFull ink setInk in the setAbout per mL
Converted EcoTank (Hiipoo)from $23.73337 mL$0.07
Epson F170 (Epson bottles)$99.80560 mL$0.18
Brother SP-1$169.99188 mL$0.90
Sawgrass SG500$288.96124 mL$2.33

What a starter setup costs

Besides the printer, you need sublimation paper, a heat press that fits what you’re making, and blanks to press onto. For mugs, the Cricut Mug Press was $99 with 4 blank mugs, and Cricut says it works with compatible poly-coated sublimation mug blanks from 11 to 16 oz with straight sides, not just its own. A-SUB sublimation paper was $16.79 for 110 letter-size sheets, about 15 cents a sheet. For tumblers, a VEVOR tumbler press was $83.22, and for shirts a 15 by 15 inch clamshell press like the Fancierstudio ran $130 to $175 depending on the brand.

SetupWhat’s in itTotal
Cheapest mug setupET-2803 $239.99, Hiipoo ink from $23.73, paper $16.79, Cricut Mug Press with 4 mugs $99$379.51
Mug setup with a dedicated printerEpson F170 $399 (ink included), paper $16.79, Cricut Mug Press with 4 mugs $99$514.79
Tumbler setup with a dedicated printerEpson F170 $399, paper $16.79, VEVOR tumbler press $83.22$499.01

Blanks add to that as you go. On Amazon, a 36-pack of 11 oz sublimation mugs was $65.58 (about $1.82 a mug), an 8-pack of 20 oz skinny tumblers was $33.99 (about $4.25 each), and a 12-pack of tees listed as white polyester started at $31.29 (about $2.61 each).

As an Amazon Associate I earn from qualifying purchases.

Can you make the money back?

I read the first page of Etsy results for finished mugs and tumblers on November 20, 2026, leaving out ads and anything that was a digital file, a transfer, a blank or made another way (engraved, glitter, vinyl), though some of what’s left may not be sublimated. These are asking prices, not sold prices, and the search shows the price of each listing’s cheapest option, so use them as a rough guide. For the fees I used Etsy’s US rates of $0.20 a listing, 6.5% a sale and 3% plus $0.25 for payment processing, which are explained in how much Etsy charges, and I left out shipping, which adds its own fees and costs.

Mugs

Can you sell it? Yes, and it’s the product I’d start with.

  • What it takes: a printer, paper and a mug press. Each mug costs about $1.82 for the blank and 15 cents for the paper, plus ink I couldn’t price per print.
  • Similar pieces sell for: 16 personalized coffee mugs on Etsy ran from $6.75 to $46.45. Half were priced between $12.30 and $17.41, and the median was $14.45. All 16 were on sale, and 3 had a Bestseller badge.
  • My take: at $14.45, Etsy’s fees come to about $1.82, which leaves about $10.66 a mug before ink, packaging and your time. That pays back the $379.51 converted setup in about 36 mugs, or the $514.79 Epson F170 setup in about 49 (about one fewer, since the press came with 4 mugs).

Tumblers

Can you sell it? Not on Etsy as a first product, because the prices there are very low.

  • What it takes: a printer, paper and a tumbler press. Each 20 oz tumbler costs about $4.25 for the blank and 15 cents for the paper, plus ink.
  • Similar pieces sell for: 21 personalized 20 oz skinny tumblers on Etsy ran from $1.91 to $28. Half were priced between $3.58 and $18.69, and the median was $9.99. 18 of the 21 were on sale, and one shop had a personalized stainless tumbler at $3.57 with free shipping.
  • My take: at $9.99, fees take about $1.40, the blank about $4.25 and the paper about 15 cents, which leaves about $4.19 a tumbler. The $499.01 Epson F170 tumbler setup would need about 120 sales to pay back. When I searched “sublimated tumbler”, most of the listings were tumbler wrap designs and transfers sold to other makers, which tells me plenty of people are already doing this.

Shirts

Can you sell it? Maybe, but I’d test mugs before shirts.

  • What it takes: a 15 by 15 inch heat press ($130 to $175) and polyester shirts at about $2.61 each. Designs are limited to 8.5 inches wide on the F170, SP-1 or SG500.
  • Similar pieces sell for: I didn’t price shirts on Etsy for this post, so I don’t have a fair number to give you.
  • My take: sublimation works best on white or light polyester, which narrows what you can offer, and the press costs more than a mug press. I’d add shirts once mugs are selling and you already own the printer.

Which one I’d buy

If you’re sure you want to sell sublimated pieces, I’d buy the Epson F170, because it’s made for sublimation, keeps its warranty with Epson’s ink, and has the cheapest genuine refills of the three dedicated printers here. If you only want to find out whether you enjoy it, the converted ET-2803 setup costs about $135 less, and you can move to a dedicated printer later if the mugs sell. The SP-1 and SG500 make sense if you’d rather use cartridges or want the Sawgrass warranty, as long as you’re fine paying more for ink.

Whichever you pick, add your hours to the price with the pricing formula for handmade items before you decide a product is worth it, and look at other things to make and sell if the numbers don’t work for you. If you already own a Cricut, these Cricut hacks save money on tools, and these small business packaging ideas help your orders look finished when they arrive. If you’re new to selling online, the guide to selling on Etsy walks through opening a shop.

Happy pressing, and good luck with your first order!

Leave a Reply

Your email address will not be published. Required fields are marked *