Of the woodworking projects that sell on Etsy, blanket ladders, jewelry boxes, serving trays and walnut cutting boards list for the most, with median asking prices from $63 to about $115. For an easy start, floating shelves and plant stands need a saw, a drill, a sander and, for the plant stand, a nailer, list for a median of $48.50 and $59.99, and showed Etsy’s Bestseller badge on more listings than any other project I checked.
I read the Etsy prices from real listings in November 2026, using the first page of results and leaving out the ads. They’re asking prices, not sold prices, and each search mixes sizes and types of wood, so treat them as a starting point and check current listings before you set your own. By “middle half” I mean the middle 50% of those prices, with the cheapest and most expensive quarter left out.
What lumber costs
Most of these projects start from plain pine or cedar boards. Here’s what a Home Depot store near me charged in November 2026 (prices vary by store, so check yours):
- 1×4 whitewood board, 8 feet: $9.52 (a premium kiln-dried common board)
- 1×4 select pine board, 6 feet: $12.24
- 1×12 pine common board, 4 feet: $15.35
- Western red cedar fence picket, 6 feet: $4.28, or $3.75 for the kiln-dried picket
I didn’t price 2x2s, 1x2s, 1×3 furring strips, plywood, screws or nails, so where a project needs those I say so. Hardwood for cutting boards comes as narrow strips in mixed packs.
Time is the hidden cost: a few of these tutorials give their own build times, but I didn’t time anyone making these myself, so most projects here have no hours listed. When I ran the numbers on a welded horseshoe wine rack in how to price handmade items, a piece that covered its materials and fees still paid the maker only a few dollars an hour once the time was counted (using 3 hours as an example). Time your own first few builds before you decide what a piece is worth to you.
Tools and supplies
These tutorials lean on the same handful of power tools, so one small kit covers most of the list.
- Tools most projects use: a circular saw or miter saw, a drill, a sander and a brad nailer, plus a measuring tape, a pencil and safety glasses. A few projects add clamps, a table saw or a pocket-hole jig.
- Hardwood for cutting boards and trays: a walnut, maple and cherry board pack gives you 2-inch-wide strips to glue up into a board. One pack won’t make every size of board, so check the strip size against your plan.
- Food-safe finish: food-grade mineral oil for anything that holds food, like cutting boards, charcuterie boards and serving trays.
- Wood glue: Titebond III is the glue tutorials usually name for boards that get wet or washed. I couldn’t find a statement from the maker that it’s food safe, so I don’t call it that, and you shouldn’t in your listings either.
As an Amazon Associate I earn from qualifying purchases. The Amazon links here pay me a small commission at no extra cost to you.
Kitchen pieces (these need a food-safe finish)
Cutting boards, charcuterie boards and serving trays all hold food, so the finish has to be safe to eat from. The USDA Forest Products Laboratory’s one-page sheet on finishes for wood used with food says to use a finish that’s recommended for food or labeled food grade. It names mineral oil as a finish that has been used on wood utensils, calls walnut oil particularly suitable, and calls melted paraffin wax (the canning kind) one of the simplest ways to finish wood utensils such as cutting boards.
The same sheet says baby oil should not be used, because it has ingredients that shouldn’t touch food. Vegetable oils like olive or corn oil can go rancid and leave a smell or an off taste, so mineral oil is the easier choice for something you’re selling. If you use any other finish, go by what the can’s label says about food contact.
1. Cutting board

A cutting board is strips of hardwood glued side by side, flattened, sanded and oiled. Woodshop Diaries’ basic cutting board uses a maple 1×6 with three walnut strips, and calls for a saw that cuts straight, clamps, a belt sander (or a planer) and an orbital sander, with a table saw and a router with a chamfer bit as options.
Can you sell it? Yes, and walnut boards list for some of the better prices here.
- What it takes: hardwood (I didn’t work out how many strips one board needs, since board sizes vary), wood glue, food-grade mineral oil, clamps and sanders
- Similar pieces sell for: 32 walnut cutting boards on Etsy started at $11.99 and went up to $209.99. Half were priced between $43.61 and $95.25, and the median was $63. Etsy’s Bestseller badge showed on 8 of them.
- My take: a solid pick if you have clamps and a sander, because the wood is the main cost and the prices leave room for it. Price your own boards from what you actually paid for the strips.
2. Charcuterie board

A charcuterie board is a serving board for meat, cheese and snacks. Ana White’s grazing board is made from scrap 1x and 2x wood in a 1×2 frame, cut with a miter saw and put together with 1-1/4 inch brad nails and wood glue, and the plan says you can make it in about an hour. The plan finishes it with stain and tells you to add polyurethane if you’ll serve food on it, but it doesn’t call that finish food safe, so check the can’s label, or use mineral oil, walnut oil or paraffin wax, if food will sit on the wood.
Can you sell it? Yes, though it lists for less than a cutting board.
- What it takes: the plan lists its cost as “scraps”, plus a 1×2 for the frame, brad nails, glue and a finish rated for food
- Similar pieces sell for: 42 wood charcuterie boards on Etsy ran from $11.75 to $140. Half were priced between $37.92 and $70.16, and the median was $49.87. Only 3 showed a Bestseller badge.
- My take: a good way to use up offcuts, since the wood costs you next to nothing if you already have scraps. Fewer listings carried the Bestseller badge than for cutting boards or trays, so I’d sell these next to a cutting board rather than on their own.
3. Serving tray

A serving tray is a shallow wooden tray for an ottoman, a coffee table or carrying food. Ana White’s tongue and groove ottoman tray uses one 8-foot 1×2 and one 8-foot 1×6 pine tongue and groove board, cut with a circular saw and put together with a nailer, brad nails and glue, then sanded.
Can you sell it? Yes, and it’s one of the strongest kitchen pieces on the list.
- What it takes: Ana White says “less than $20 to build” (the plan’s own words, with no date), plus a food-safe finish if food will touch the wood
- Similar pieces sell for: 57 wooden serving trays on Etsy ran from $16.49 to $180. Half were priced between $42 and $89, the median was $63.75, and 10 showed a Bestseller badge.
- My take: pine is cheap and the median price is more than three times the plan’s cost estimate, which is a good gap. Decide up front whether you’re selling it as decor or for food, and finish it to match.
Home decor
4. Floating shelf

A floating shelf hangs on the wall with no brackets showing. Anika’s DIY Life has a floating shelf tutorial that needs a saw (a circular saw, a mini circular saw, or a miter saw or miter box), a drill and a sander, with a brad nailer as an option. The tutorial gives its own estimate of 1 to 2 hours, plus drying time for the stain and top coat.
Can you sell it? Yes, and it had the most Bestseller badges of anything I checked.
- What it takes: boards for the shelf (I didn’t price a specific shelf size), a saw, a drill and a sander
- Similar pieces sell for: 33 wood floating shelves on Etsy ran from $18.90 to $164.44. Half were priced between $29.50 and $68, and the median was $48.50. 18 of the 33 showed a Bestseller badge.
- My take: more than half the listings carrying the badge is a good sign that shoppers buy these, and the tool list is short. The Rich and Free names “unique shelves” as a crowded niche on Etsy, so good photos and a clear size and wood type will matter a lot.
5. Wooden sign

A wooden sign is a painted board, often with a name, a date or a saying, set in a thin wood frame. This tutorial on lovelyetc.com shows how to make easy DIY wood signs from 3/4-inch birch plywood (or a pre-cut craft store blank), paint, a stencil or printout, oil-based paint pens, and a 1×2 pine frame that’s stained and cut with a miter saw. The author says the design files are for personal use only, so use your own lettering and designs for anything you sell.
Can you sell it? Yes, especially as custom orders with your own designs.
- What it takes: birch plywood or a craft store blank, a 1×2 for the frame, paint and paint pens, a saw and a hammer or brad nailer (I didn’t price the plywood or blanks)
- Similar pieces sell for: 30 custom wood signs on Etsy ran from $7.49 to $100.20. Half were priced between $22.99 and $48.88, the median was $32.40, and 11 showed a Bestseller badge. Etsy showed only personalized signs for this search.
- My take: the prices are modest, but a name or a date makes each sign one a factory can’t copy. The wood is a small part of the cost, so the design and the lettering are where your time goes.
6. Jewelry box

A jewelry box is a small lidded box, often lined with felt. Minwax has beginner jewelry box plans (a PDF download) for practicing miter cuts, biscuit joints and felt lining. The maple and walnut jewelry box from Fix This Build That is the harder build, using a drum sander, a table saw, a miter saw, a random orbital sander and several kinds of clamps.
Can you sell it? Yes, but not as your first project.
- What it takes: wood and felt for the beginner version (the Minwax page has no tool list I could read), or hardwood and a full shop of tools for the fancier one (I didn’t price either)
- Similar pieces sell for: 44 wooden jewelry boxes on Etsy ran from $19.68 to $385. Half were priced between $42.75 and $115.73, the median was $80.38, and 7 showed a Bestseller badge.
- My take: the second-highest median here, but tight miters and a lid that fits are what buyers pay for, and that takes practice. Build a few for yourself before you list one.
7. Christmas tree shelf

A Christmas tree shelf is a set of boards in a tree shape that hangs on the wall and holds small ornaments or decorations. Ana White’s Christmas tree shelf uses 1×3 or 1×4 boards cut with a circular saw and a compound miter saw, then nailed and sanded.
Can you sell it? Yes, as a holiday item you list early in the season.
- What it takes: Ana White says “Under $10 to build (for 1x3s)”
- Similar pieces sell for: 56 wood Christmas tree shelves on Etsy ran from $4.99 to $295. Half were priced between $17 and $58, the median was $28.99, and 6 showed a Bestseller badge.
- My take: cheap to make and a wide price range, so a well-finished one can sit at the top of the middle half. It’s a Christmas piece, so build ahead and have it listed before the holiday shopping starts.
8. Coasters

Wooden coasters are small squares or rounds cut from one board and sanded, and they usually sell as a set. Harbor Freight’s wooden coasters project cuts them from a single 1×4 hardwood board with a compact circular saw and a palm sander, then finishes them with stain or sealant. Saws on Skates has a fussier mini pallet coaster version that uses a miter saw, a table saw and a pin nailer.
Can you sell it? Yes, but the prices are low for the work.
- What it takes: one 1×4 board (I priced only softwood, where an 8-foot whitewood 1×4 was $9.52), sandpaper and stain or sealant (Saws on Skates says you can also leave them unsealed or use clear polyurethane spray)
- Similar pieces sell for: 37 wooden coaster sets on Etsy started as low as $1.44 and went up to $59.95. Half were priced between $17.60 and $32.99, the median was $24, and 3 showed a Bestseller badge.
- My take: a single 1×4 board is the main material, but a set at about $24 doesn’t leave much once Etsy’s fees and your time come out. They work better as an add-on next to a tray or a cutting board, or as a cheap item on a craft fair table.
9. Picture frame

A handmade picture frame is four boards joined around a photo or a print. Ana White’s craftsman frame uses one 8-foot 1×3 and a 3-foot 1×2, cut with a circular saw and joined with a Kreg pocket-hole jig and a drill.
Can you sell it? It lists, but I’d skip it unless the frame is something special.
- What it takes: Ana White says “Under $20”, plus glass or a backing if you include them
- Similar pieces sell for: 41 handmade wood picture frames on Etsy ran from $13.49 to $85.50. Half were priced between $22.45 and $47, the median was $25.99, and 7 showed a Bestseller badge.
- My take: with the plan’s own estimate at under $20, a median price of $25.99 leaves very little for fees and your time. Shoppers can buy frames almost anywhere, so a plain one is hard to sell for more.
Outdoor and garden
10. Plant stand

A plant stand lifts a pot or a small planter off the ground. Ana White’s small raised planter stands use two 8-foot 2x2s, one 6-foot cedar fence picket, a planter liner and screws, with a drill, a circular saw, a nailer and a sander.
Can you sell it? Yes, and it’s one of the best picks on this list.
- What it takes: a cedar picket ($4.28 at my Home Depot), two 2x2s (not priced), a planter liner and screws
- Similar pieces sell for: 60 wooden plant stands on Etsy ran from $8.10 to $216.91. Half were priced between $36.53 and $83.99, the median was $59.99, and 13 showed a Bestseller badge.
- My take: cheap wood, a short tool list and a median near $60 make this a good first product to test. It also had the second-most Bestseller badges after floating shelves.
11. Bird feeder or birdhouse

A cedar bird feeder or a simple birdhouse is a classic first woodworking project. Ana White’s cedar bird feeder is cut with a circular saw and a compound miter saw and put together with a nailer. The plan says you can finish it in under an hour and calls it a great gift or item to sell at farmers markets. Suncatcher Studio’s birdhouse plans need a 1×6 board, 1.5-inch screws, a drill, a hand saw and a bit for the entrance hole.
Can you sell it? Yes, though I’d start with local sales over Etsy.
- What it takes: Ana White says the feeder is “under $5 in materials”, and a cedar picket was $4.28 at my Home Depot
- Similar pieces sell for: 47 cedar bird feeders on Etsy ran from $19.99 to $259, with half between $34.95 and $72 and a median of $46.40, and none showed a Bestseller badge. 61 wooden birdhouses ran from $12 to $441.83, with half between $34 and $79.99 and a median of $51.99, and 4 showed the badge.
- My take: the material cost is tiny next to the asking prices, which makes this one of the best ratios here. With no Bestseller badges on the feeders, I’d try a farmers market or craft fair first, as the plan suggests, and add Etsy later.
Bigger pieces
12. Blanket ladder

A blanket ladder leans against a wall and holds throws and quilts on its rungs. Ana White’s 1×3 blanket ladder is a beginner build from three 8-foot 1×3 furring strips with screws or brad nails and glue, using a drill and a circular saw.
Can you sell it? Yes, and it lists for the most, but plan on local buyers.
- What it takes: three 1×3 furring strips (not priced), screws or brad nails and glue, a drill and a circular saw
- Similar pieces sell for: 31 blanket ladders on Etsy started at $47.42 and went up to $319. Half were priced between $92.53 and $150, and the median was $115.20, the highest on this list, but none showed a Bestseller badge.
- My take: simple wood and the highest prices of anything here, but a ladder several feet long can be awkward and costly to ship. Sell it locally on Facebook Marketplace or at a craft fair, or build the shipping cost into your price.
Wood projects I’d skip
Wood slices
Wood slices (rounds cut from a log) show up on some “projects that sell” lists, but you need a log and a saw big enough to cut it, and the cheapest ones on Etsy cost a quarter.
Can you sell it? Skip it, because there are too many cheap slices already.
- What it takes: a log and a saw big enough to cut through it
- Similar pieces sell for: 44 wood slice listings on Etsy started at just $0.25 and topped out at $68. Half were priced between $12.35 and $32.99, the median was $25, and 4 showed a Bestseller badge.
- My take: the listings start at a quarter, so you’re competing with listings priced at a quarter. Use slices as the base for a sign or an ornament you decorate instead of selling them plain.
Big furniture
Coffee tables, console tables, TV stands and wardrobes show up on these lists too. I didn’t check Etsy prices for them, and I’d still skip them as a first product to sell, because they take much more wood, more tools and more of your time than the smaller projects, and they can be awkward and costly to ship. If you want to work on furniture, fixing up an old piece like a dry sink is another way in.
Which woodworking projects are worth selling
| Project | Etsy median price | Bestseller badges | Worth selling? |
|---|---|---|---|
| Blanket ladder | $115.20 | 0 of 31 | Yes, sell locally |
| Jewelry box | $80.38 | 7 of 44 | Yes, once you have the skills |
| Serving tray | $63.75 | 10 of 57 | Yes |
| Walnut cutting board | $63 | 8 of 32 | Yes |
| Plant stand | $59.99 | 13 of 60 | Yes, a top pick |
| Birdhouse | $51.99 | 4 of 61 | Yes, start local |
| Charcuterie board | $49.87 | 3 of 42 | Yes, from scraps |
| Floating shelf | $48.50 | 18 of 33 | Yes, a top pick |
| Cedar bird feeder | $46.40 | 0 of 47 | Yes, start local |
| Custom wood sign | $32.40 | 11 of 30 | Yes, with your own designs |
| Christmas tree shelf | $28.99 | 6 of 56 | Yes, in season |
| Picture frame | $25.99 | 7 of 41 | Skip unless special |
| Wood slices | $25 | 4 of 44 | Skip |
| Coasters | $24 | 3 of 37 | Only as an add-on |
Before you sell wood projects
- Use a food-safe finish on kitchen pieces: mineral oil, walnut oil or paraffin wax, following the USDA sheet, and never baby oil. Don’t describe your glue as food safe unless the maker says so.
- Sell your own designs: some plans and design files are for personal use only, as the wood sign tutorial says about its files, so make the designs you sell your own.
- Count Etsy’s fees: Etsy takes a listing fee, a transaction fee and a payment processing fee on every sale, and those hit cheap items like coasters hardest. The breakdown is in how much Etsy charges.
- Price in your time and the shipping: the pricing formula for handmade items adds your materials, your hours and your fees, and big pieces like blanket ladders need the shipping built in or a local buyer.
If you’re opening a shop for the first time, the step-by-step guide to selling on Etsy covers what you need to get set up. For more wood projects that use found material, try these driftwood craft ideas, and for ideas beyond wood, my list of things to make and sell checks Etsy prices for candles, soap, crochet and more.
Happy building, and good luck with your first sale!
Leave a Reply